As an advanced printing equipment, the daily maintenance of digital sublimation printer is very important. Effective maintenance techniques can prolong its service life and bring more economic benefits to manufacturers. Today, I will share with you some daily operation and maintenance skills of digital sublimation printer.

• daily operation and maintenance of digital sublimation printer 

1. Check before starting:

• Air pressure check: Check that the air pressure of the air pump is normal.

  
  

• Printing platform inspection: The printing platform should be kept free of foreign objects to avoid scratches and damage to the print head.

   

• Waste ink tank inspection: Check the liquid level of the waste ink tank to prevent the waste ink tank from overflowing and flowing out during cleaning.

   

• Ink check: Ensure that the ink cartridges are full of ink to avoid emptying the print head, causing damage and blockage of the print head.

   

• Scraper inspection: The cleaning mechanism is kept clean, and the scraper is kept clean and free from damage to avoid affecting the ink scraping effect.

   

• Nozzle status check before printing: Print and check the nozzle status diagram to confirm that the nozzle effect is in the best state. If not, you need to perform a cleaning operation to make the nozzle state achieve the best effect. 

2. Nozzle maintenance:

• Be sure to cut off the power when disassembling and assembling the print head: Install and disassemble the circuit of the digital printer at will without turning off the power switch and cutting off the main power supply. This behavior can impair the service life of individual systems, especially the sprinkler heads.

   

• Do not leave the cleaning solution in the print head for a long time: soaking the print head with the cleaning solution for a long time can remove stains more effectively, but if the soaking time exceeds 48 hours, it may cause corrosion to the nozzle holes of the print head.

   

• To replace the ink, clean the print head: even if it is the same ink, inks produced by different manufacturers contain different components. If the ink is directly replaced without cleaning, it may generate more particles and block the print head, so be sure to change the ink before changing the ink. To clean the nozzle.

  
  

• Pay attention to electrostatic protection: digital printers are greatly affected by static electricity, so you cannot directly touch the print head with your hands. Wear protective gloves when maintaining the print head, and you must always check the connection of the ground wire.

  
  

Fedar Printer focuses on DTF Printer, Sublimation Printer and Textile Printer (https://www.tex-printer.com/) more than 15 years. Fedar is a Professional Manufacture of Printers in China.

At present, Fedar products have been sold to all over the world, including U.S.A., Canada, Germany, Poland, Brazil, Peru, Australia, Russia, Singapore, South Africa, India, Thailand, Philippines, Pakistan and other more than 30 countries.